From The Compiler, 4 Years ago, written in Plain Text.
Embed
  1. U-Boot SPL 2011.09 (Aug 29 2012 - 04:00:45)
  2. MMC:   SUNXI SD/MMC: 0
  3. Loading U-Boot...   OK!
  4. Jumping to U-Boot...
  5.  
  6.  
  7. U-Boot 2011.09 (Aug 29 2012 - 04:00:45) Allwinner Technology
  8.  
  9. CPU:   SUNXI Family
  10. Board: A10-EVB
  11. DRAM:  512 MiB
  12. MMC:   SUNXI SD/MMC: 0
  13. *** Warning - bad CRC, using default environment
  14.  
  15. In:    serial
  16. Out:   serial
  17. Err:   serial
  18. Hit any key to stop autoboot:  0
  19. reading uEnv.txt
  20.  
  21. ** Unable to read "uEnv.txt" from mmc 0:1 **
  22. Loading file "uEnv.txt" from mmc device 0:1 (xxa1)
  23. Failed to mount ext2 filesystem...
  24. ** Bad ext2 partition or disk - mmc 0:1 **
  25. Loading file "boot/uEnv.txt" from mmc device 0:1 (xxa1)
  26. Failed to mount ext2 filesystem...
  27. ** Bad ext2 partition or disk - mmc 0:1 **
  28. reading boot.scr
  29.  
  30. 835 bytes read
  31. Jumping to boot.scr
  32. ## Executing script at 44000000
  33. reading script.bin
  34.  
  35. 42144 bytes read
  36. reading uImage
  37.  
  38. 3926020 bytes read
  39. reading uInitrd
  40.  
  41. ** Unable to read "uInitrd" from mmc 0:1 **
  42. ## Booting kernel from Legacy Image at 48000000 ...
  43.    Image Name:   Linux-3.0.39+
  44.    Image Type:   ARM Linux Kernel Image (uncompressed)
  45.    Data Size:    3925956 Bytes = 3.7 MiB
  46.    Load Address: 40008000
  47.    Entry Point:  40008000
  48.    Verifying Checksum ... OK
  49.    Loading Kernel Image ... OK
  50. OK
  51.  
  52. Starting kernel ...
  53.  
  54. <6>Initializing cgroup subsys cpuset
  55. <5>Linux version 3.0.39+ (buildbot@rhombustech) (gcc version 4.7.1 20120531 (prerelease) (crosstool-NG linaro-1.13.1-2012.06-20120625 - Linaro GCC 2012.06) ) #1 PREEMPT Wed Aug 29 04:06:07 EST 2012
  56. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d                                                                                                                                      
  57. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  58. Machine: sun4i                                                  
  59. <6>Total Detected Memory: 512MB with 1 banks
  60. <6>64 MB reserved for MALI                  
  61. <6>Memory Reserved:      
  62. <6>     SYS  : 0x43000000 - 0x4300ffff  (  64 kB)
  63. <6>     VE   : 0x44000000 - 0x48ffffff  (  80 MB)
  64. <6>     G2D  : 0x58000000 - 0x58ffffff  (  16 MB)
  65. <6>     LCD  : 0x5a000000 - 0x5bffffff  (  32 MB)
  66. Memory policy: ECC disabled, Data cache writeback
  67. <7>On node 0 totalpages: 114688                  
  68. <7>free_area_init_node: node 0, pgdat c07654a4, node_mem_map c081e000
  69. <7>  Normal zone: 896 pages used for memmap                          
  70. <7>  Normal zone: 0 pages reserved        
  71. <7>  Normal zone: 113792 pages, LIFO batch:31
  72. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  73. <7>pcpu-alloc: [0] 0                            
  74. Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
  75. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 loglevel=8 panic=10 rootwait
  76. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)                                      
  77. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  78. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  79. <6>Memory: 448MB = 448MB total                                  
  80. <5>Memory: 315276k/315276k available, 143476k reserved, 0K highmem
  81. <5>Virtual kernel memory layout:                                  
  82.     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  83.     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  84.     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  85.     vmalloc : 0xdc800000 - 0xf0000000   ( 312 MB)
  86.     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
  87.     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
  88.     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
  89.       .init : 0xc0008000 - 0xc0031000   ( 164 kB)
  90.       .text : 0xc0031000 - 0xc0727000   (7128 kB)
  91.       .data : 0xc0728000 - 0xc076d448   ( 278 kB)
  92.        .bss : 0xc076d46c - 0xc081d2d0   ( 704 kB)
  93. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  94. <6>NR_IRQS:96 nr_irqs:96 96                                              
  95. <6>timer0: Periodic Mode  
  96. <6>Console: colour dummy device 80x30