From rik, 8 Months ago, written in Plain Text.
Embed
  1. 1.  Check existing configuration of router and switches (reset if necessary)
  2.  
  3.     erase startup-config
  4.     reload
  5.  
  6. 2.  Configure hostname, IP addresses and subnets for interfaces on the routers
  7.  
  8.     enable
  9.     configure terminal
  10.     hostname R2
  11.     interface FastEthernet (0/0 or 0/1 depending on where the cable is patched)
  12.     ip address 172.16.1.0 255.255.255.0 (0/0)
  13.     no shutdown
  14.     ip address 172.16.1.0 255.255.255.252 (0/1)
  15.     no shutdown
  16.  
  17. 3.  Assign static IP addresses and corresponding default-gateways to the clients
  18. 4.  Add routes to the other (client-)subnet of on the routers
  19.     ip route 172.16.0.0 255.255.255.0 192.168.10.1
  20.